BPYPW - A-40 PART A
- MSDS: BPYPW
- Manufacturer: MORTON INTERNATIONAL
- Product Name: A-40 PART A
- National Stock Number: 8040-00N022800
Product Identification
Product ID:A-40 PART A
MSDS Date:03/21/1990
FSC:8040
NIIN:00N022800
Kit Part:Y
MSDS Number: BPYPW
Responsible Party
CHICAGO, IL 60606-1292
US
Emergency Phone: 815-338-1800
Info Phone: 312-807-3137
Cage: DO471
Contractor
Telephone: 312-807-2000
Cage: 32063
Ingredients
EVACUATE EMPLOYEES & VENT AREA. NIOSH/MSHA APPRVD
RTECS: 9999999ZZ
ENCLSD SPACES/IN AREAS W/INADEQ VENT.
RTECS: 9999999ZZ
APPROP GOVT ENVIRON AGENCIES IF FURTHER
RTECS: 9999999ZZ
ALTERNATIVE BE SELECTED ACCDG TO FOLLOWING ORDER OF
RTECS: 9999999ZZ
REWORK IF FEASIBLE, 2)INCIN AT AUTH FACILITY,
RTECS: 9999999ZZ
4)LANDFILL AT APPRVD FACILITY (SOLIDIFICATION OR
RTECS: 9999999ZZ
MAY NECESSITATE USE OF SCBA OR SUPPLIED AIR
RTECS: 9999999ZZ
ACCEPTABLE. HOWEVER, LOCAL EXHAUST VENT IS RECOM WHEN
RTECS: 9999999ZZ
BY APPROP GOVT OFFICIAL. IF AIRBORNE CONC
RTECS: 9999999ZZ
TALC (POWDER), CONTAINING NO ASBESTOS FIBERS; (TALC/HYDROUS
CAS: 14807-96-6
RTECS: WW2710000
Fraction By Weight: 1-5%
OSHA PEL 20 MPPCF
ACGIH TLV: 2 MG/M3 RDUST
SHOWN TO BE MUTAGENIC IN SOME MICROBIAL
RTECS: 9999999ZZ
OTHERS. CHROMOSOMAL ABERRATONS OBSERVED IN CULTURED
RTECS: 9999999ZZ
MECH ACTION. CAN CAUSE GI IRRIT IF INGEST. INHAL OF
RTECS: 9999999ZZ
MAY CAUSE MECH
RTECS: 9999999ZZ
DRYNESS. PRLNG & RPTD EXPOS TO DUSTS CAN LEAD TO
RTECS: 9999999ZZ
PRLNG & RPTD EXPOS CAN LEAD TO DEVELOPMENT OF
RTECS: 9999999ZZ
AS IMPURITY, TRACE AMTS OF ASBESTOS WHICH HAS BEEN
RTECS: 9999999ZZ
REMOVE TO FRESH AIR.
RTECS: 9999999ZZ
CALL
RTECS: 9999999ZZ
INDUCE VOMIT BY GIVING SYRUP OF IPECAC FOLLOWED BY 2
RTECS: 9999999ZZ
NO SPECIFIC ANTIDOTE IS KNOWN. THERAPY
RTECS: 9999999ZZ
THEY OCCUR & PROVIDING SUPPORTIVE THERAPY.
RTECS: 9999999ZZ
SILICON DIOXIDE; (SILICA, AMORPHOUS/SILICON DIOXIDE,
CAS: 112945-52-5
RTECS: VV7310000
Fraction By Weight: 1-5%
OSHA PEL 6 MG/M3
ACGIH TLV: 10 MG/M3
BISPHENOL A-EPICHLOROHYDRIN COPOLYMER; (BISPHENOL
CAS: 25068-38-6
RTECS: SL6475000
Fraction By Weight: 60-90%
OSHA PEL N/K
ACGIH TLV: N/K
FIBERGLASS (FIBROUS GLASS); (GLASS FIBERS)
CAS: 65997-17-3
Fraction By Weight: 5-10%
OSHA PEL 5 MG/M3 RESP DUST
ACGIH TLV: 10 MG/M3 (<7MICRONS)
Hazards
LD50 LC50 Mixture:SEE INGREDIENTS
Routes of Entry: Inhalation:NO Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:EYES: OTHER THAN POSS MECH IRRIT, NO
SIGNIFICANT ADVERSE EFTS EXPECTED. SKIN: CNTCT W/SKIN CAN CAUSE
MILD TO MOD IRRIT. CNTCT W/SKIN CAN LEAD TO DEVELOPMENT OF
HYPERSENSITIVITY (I.E., ALLERGY) IN SUSC EPTIBLE PERS. INHAL: UNDER
NORM CNDTNS OF USE, NO ADVERSE EFTS EXPECTED. INGEST: CAN CAUSE
MILD TO MOD (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ:IRRIT OF MOUTH, THROAT & ESOPHAGUS.
DEPENDING ON ROUTE, FREQUENCY & DURATION OF EXPOS, TOX MAY OCCUR IN
EYE, SKIN, IMMUNE SYS (E.G. ALLERGIC RXNS). FOLLOWING PROVIDES INFO
W/REGARD TO TOX OF "PURE" FORM OF LISTED INGREDS AS WELL AS RSLTS
OF ANY TOX STUDIES PERFORMED ON PROD. INFO CAN BE SUBJECT TO
(SUPDAT)
Medical Cond Aggravated by Exposure:PERSONS W/MEDICAL CONDITIONS
INVOLVING SKIN, IMMUNE SYSTEM &/OR SPECIFIC CHEMICAL ALLERGIES MAY
BE MORE SUSCEPTIBLE TO POSS EFTS PRODUCED BY OVEREXP & SHOULD TAKE
APPROP PRECS WHEN HNDLG THIS PROD.
First Aid
First Aid:IF DROWSY/UNCON, DO NOT GIVE ANYTHING BY MOUTH OR LEAVE
ALONE. NEVER GIVE ANYTHING TO DRINK TO PERSON WHO IS CONVLS OR HAS
NO GAG REFLEX. LOOSEN TIGHT FITTING CLTHG, CLEAR AIR & KEEP WARM.
EYES: FLUSH W/WATER FOR AT LEAST 15 MIN. IF IRRIT DEVELOPS,
CONSULT MD. SKIN: REMOVE CONTAMD CLTHG & SHOES. WASH AFFECTED AREA
W/MILD SOAP & PLENTY OF WATER. IF IRRIT DEVELOPS, CONSULT MD. WASH
CONTAMD (ING 12)
Fire Fighting
Flash Point Method:SCC
Flash Point:>200F,>93C
Extinguishing Media:SM FIRES: USE WATER (SPRAY, FOG OR IN SOME
INSTANCES, STREAM), FOAM, DRY CHEM OR CARBON DIOXIDE. LG FIRES: USE
(SUDPAT)
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:NONE KNOWN.
Accidental Release
Spill Release Procedures:SHOVEL/VACUUM SPILLED PROD & PLACE IN CLSD
CNTNRS FOR FURTHER HNDLG & DISP. FOR FLAMM SOLIDS/MATLS THAT CAN
GENERATE FLAMM GASES, USE NON-SPK TOOLS &/OR EXPLO-PROOF EQUIP. DO
NOT FLUSH TO SEWER, STREA M OR OTHER BODIES OF WATER UNLESS AUTH
(ING 17)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:STORE IN COOL, DRY, WELL VENTILATED
AREA. DO NOT STORE ABOVE 120F, 49C.
Other Precautions:NO SPEC CNTNR PRECS ARE NEEDED. FOLLOW GOOD MFG &
HNDLG PRACTS. CNTNR CAN BE HAZ WHEN EMPTY BECAUSE IT CAN RETAIN
PROD RESIDUES. THEREFORE, DO NOT REUSE CNTNR FOR FOOD, CLTHG OR
PRODS FOR HUMAN/ANIMAL CONSUMPTION/WHERE SKIN CNTCT MAY OCCUR.
Exposure Controls
Respiratory Protection:WHEN ESTABLISHED AIRBORNE EXPOS LIMS ARE
SURPASSED, WEAR NIOSH/MSHA APPRVD EQUIP. DETERM APPROP TYPE EQUIP
FOR SPECIFIC APPLICATN BY CONSULTING RESP MFR. OBSERVE RESP USE
LIMITS SPECIFIED BY NIOSH/MSH A OR MFR. HIGH AIRBORNE CONCS (ING
24)
Ventilation:MAINTAIN AIRBORNE CONCS BELOW ESTABLISHED EXPOS LIMS BY
PROVIDING ADEQ VENT. GEN (DILUTION) VENT MAY BE (ING 25)
Protective Gloves:IMPERVIOUS GLOVES.
Eye Protection:ANSI APPRVD CHEM WORKERS GOGGLES .
Other Protective Equipment:EYE WASH FACILITY SHOULD BE READILY
AVAILABLE. CONTAMINATED CLTHG & SHOES SHOULD BE THORO CLEANED &
DRIED BEFORE REUSE.
Work Hygienic Practices:WASH THORO AFTER HANDLING, ESPECIALLY BEFORE
EATING, DRINKING, SMOKING OR USING RESTROOM FACILITIES.
Supplemental Safety and Health
EXTING MEDIA: WATER (SPRAY OR STREAM) OR STANDARD FOAM. DECOMP PRODS: &
CARBON MONOXIDE). METALLIC OXIDES. EFTS OF OVEREXP:
MISINTERPRETATION, THEREFORE ESNTL THAT INFO BE INTERPRETED BY PERS
TRAINED IN ITS EVAL. BISPHENOL A/EPICHLOROHYDRIN RESIN: MOD IRRIT
TO EYES & SKIN. MAY CAUSE SKIN SENSIT. IT HAS BEEN (ING 5)
Chemical Properties
HCC:V7
Boiling Pt:B.P. Text:527F,275C
Vapor Density:>1
Spec Gravity:>1 (H*2O=1)
Solubility in Water:SLIGHTLY SOLUBLE
Appearance and Odor:NONE SPECIFIED BY MANUFACTURER.
Stability
Stability Indicator/Materials to Avoid:YES
AMINES, MERCAPTANS, OXIDIZING AGENTS, ACIDS, STRONG BASES, AMMONIA.
Stability Condition to Avoid:NONE SPECIFIED BY MANUFACTURER.
Hazardous Decomposition Products:IF HEATED TO HIGH TEMPS, PROD MAY EMIT
FOLLOWING CMPDS: PHENOLICS, SMOKE, SOOT & TOX FUMES (E.G. CARBON
DIOXIDE (SUPDAT)
Disposal
Waste Disposal Methods:IF DISCARDED IN ORIGINAL UNUSED FORM, PROD DOES
NOT MEET DEFINITION OF RCRA HAZ WASTE UNDER 40 CFR 261; IT SHOULD
BE MANAGED (STORED/TREATED/DISPOSED/ETC) AT AUTH FACILITY IN
COMPLIANCE W/ALL APPLIC F ED, STATE & LOC REQS. BE SURE TO CNTCT
(ING 20)
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.